Vaisala Vietnam |
Code: HM70K0A1A0AB |
|
Hand-held humidity and Temperature meter |
|
Indicator with Batteries ; No Indicator accessories |
|
Probe type: HMP75; Calibration Certificate At Room Temperature |
|
No Probe accessories ; NO Transmitter connection cable |
|
No Carrying case ; English User´s Guide HM70 |
Vaisala Vietnam |
Code: DMT340 810A0A1GBA4A002A1ACB0A0 |
|
Dewpoint & Temperature Transmitter |
|
Transmitter Type: Code 8; Probe Cable Length: 2M |
|
No Additional Temperature Probe |
|
Measurement Parameters: Code Td/f+PPM+x; No Display |
|
Power Supply: Standard (10..35V,24VAC) |
|
Analog Output Signal for (Ch1&Ch2&Ch3): 4...20mA |
|
Analog Output Scaling for Ch1: PPMv (0...1000) |
|
Analog Output Scaling for Ch2: Tdf (-80...+20C) |
|
No Analog Output Scaling for Ch3 |
|
Operating Pressure: Pressure Setting for Optimized Accuracy 7 bar |
|
Output Units: Metric Units |
|
No Additional Option, no 2nd Additional Option |
|
User Cable Connection: Cond Uit Fitting NPT1/2" |
|
No Transmitter Housing Installation |
|
Dewpoint Sensor: Drycap180m2 Sensor |
|
Sensor Protection: Sintered Filter AISI 316L HM47280 |
|
Probe Installation Accessories: Fitting Body NPT1/2 with No Leak Srew; User's Guide DMT340 English, No PC Accessories |
|
Dewpoint Calibration NIST Traceable |
Vaisala Vietnam |
Humidity and Temperature Transmitter |
|
Code: HMT330 7S1D001BBBB211A15ACBBA1 |
|
Transmitter type: HMT337 for high humidities |
|
Probe cables: Probe 2m +180C |
|
Additional temperature probe: T-probe, 2m, -70..+180°C 1/4 DIN Class B; Calculations: Cod RH+T+Td+a+Tw+x+h+pws With warmed RH-pro+T-pro ; No Display |
|
Power supply: Standard (10...35V,24VAC) |
|
Signal output: Analog Output 4...20mA |
|
Analog output signals for Ch1: 0...100%RH |
|
Analog output signals for Ch2: 0...100%RH |
|
Analog output signals for Ch3: 0...100%RH |
|
Analog output range for temperature: Temperature Range -40...+60C ; Output units: Non Metric Units |
|
Option for module slot 1: Relay Module |
|
Option for module slot 2: Relay Module |
|
Cable bushings: Sealed Cable Gland M20x1.5 |
|
Transmitter installation: Wall Mounting Kit |
|
Humidity sensor: Heated composite sensor HUMICAP180C |
|
Sensor protection: PPS Grid with Steel Netting |
|
Installation kit for probe: Duct Installation Kit For HMT333 and HMT337 ; User´s Guide HMT330 English |
|
PC Accessories: RS232 Serial Interface Cable with D9 Female Connector ; No Calibration Contract ISO9001 Calibration |