ULTRASONIC WALL THICKNESS
STANDARD  GAUGES   Model
   
TI-25LT Economical steel only model
TI-25P Programmable Wall Thickness  Gauge factory set for steel with adjustment for any other material using a computer
TI-44N Low cost / general purpose with integrated probe-cable
TI-45N Low cost / general purpose
TI-45N-HD Low cost /general purpose with rubber protective  sleeve
TI-25M General purpose, starting  at 0.025"  (0.60mm)
TI-25M-WOP Ultrasonic  Thickness  Gauge WITHOUT PROBE
TI-25M-102 General Purpose, starting  at 0.040"  (1.00mm)
TI-25M-MMX Standard thru paint to 1" (25mm) wall
TI-25M-MMX-H Standard thru paint to 1" (25mm) wall with high temperature probe
TI-25M-MMX-EXT Extended range thru paint to 5" (127mm)  wall
TI-25M-MMX-UWM Underwater thru paint
TI-25M-H High temperature (650 °F / 343 °C) Use of CF-2H high temperature couplant (p. 4) suggested
TI-25M-107 Cast iron / plastics
TI-25M-107-H High temperature (650 °F / 343 °C) Use of CF-2H high temperature couplant (p. 4) suggested
TI-25M-UWM Underwater gauge
TI-25M-2120 Engine blocks
TI-25M-PR8 Cylinder wall/engine  block
TI-25M-162 Race gauge with T-162-21 10 transducer
TI-25M-HW Heavy wall (0.040–19.999"    / 1.27–508mm)
TI-25S Selectable wall thickness  gauge with 8 preset and 2 custom calibrations
MX-1 Wall thickness  gauge with key selectable  velocity
MX-2 Wall thickness  gauge with key selectable  velocity
TI-007 Precision  thin-wall  gauge for non-corroded metals
TI-007-GT Precision  thin-wall  gauge for non-corroded plastics  and metals
TI-CMX Ultrasonic  Coating  and Wall Thickness  Gauge
TI-CMX-H High temperature (650 °F / 343 °C) Use of CF-2H high temperature couplant (p. 4) suggested